MATSONIC MS8328E Series User Manual Download | Manualshive

Page: 1 / 39

background image

Mainboard User’s Manual

This publication, including all photographs, illustrations and
software, is protected under international copyright laws, with all
rights reserved. Neither this manual, nor any of the material
contained herein, may be reproduced without written consent of the
author.
The information in this document is subject to change without
notice. The manufacturer makes no representations or warranties
with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability or fitness for any particular
purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation of the manufacturer to notify any person
of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International
Business Machines.
Intel, Pentium/II/III, Pentium 4, Celeron and MMX are registered
trademarks of Intel Corporation.
Microsoft, MS-DOS and Windows 98/ME/NT/2000/XP are
registered trademarks of Microsoft Corporation.
PC-cillin is a registered trademark of Trend Micro Inc.
AMI is a registered trademark of American Megatrends Inc.
MediaRing Talk is a registered trademark of MediaRing Inc.
3Deep is a registered trademark of E-Color Inc.
Recovery Genius 21

st

, CD Ghost and Language Genius 21

st

are

trademarks of GoldenSoft Technology Co., Ltd.
SiS is a trademark of Silicon Integrated System Corporation.
Other names used in this publication may be trademarks and are
acknowledgedledged.

Copyright © 2002

All Rights Reserved

MS8328E Series, V2.1

S740/November 2002

1
2
3
...
»

Summary of Contents for MS8328E Series








































Reviews:

No comments

Related manuals for MS8328E Series

Brand: IEI Technology Pages: 177

ATmega328P Xplained Mini

Brand: Microchip Technology Pages: 26

Brand: MSI Pages: 30

Brand: Procomp Pages: 55

WAFER-CV-N26001

Brand: IEI Technology Pages: 135

PX845EV1 Series

Brand: Albatron Pages: 56

STEVAL-IME008V1

Brand: STMicroelectronics Pages: 19

Brand: DFI Pages: 96

Brand: Honda Pages: 132

KX224-I2C-EVK-001

Brand: Rohm Pages: 3

Brand: ST Pages: 14

Brand: SOLTEK Pages: 94

BOOSTXL-DRV8301

Brand: Texas Instruments Pages: 13

EVB-LAN9252-SPI

Brand: Microchip Technology Pages: 22

Brand: Abit Pages: 134

Brand: DFI Pages: 102

Brand: DFI Pages: 98

Brand: ASROCK Pages: 260

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands