Axiom SBC8156, User Manual

Page: 62 / 96

SBC8156 Pentium All-in-One CPU Card Series User’s Manual
Award BIOS Utility 9&
z
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware
(e.g., Windows 95). The default value is “No” .
z
Resources Controlled By
The Award Plug and Play BIOS can automatically configure all the boot
and Plug and Play-compatible devices. If you select Auto, all the
interrupt request (IRQ), DMA assignment, and Used DMA fields
disappear, as the BIOS automatically assigns them. The default value
is
“Manual” .
z Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup if
you have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the operating system cannot boot.
The default value is
“Disabled” .
z
PCI IDE IRQ Map To
This field lets you select PCI IDE IRQ mapping or PC AT (ISA)
interrupts. If your system does not have one or two PCI IDE
connectors on the system board, select values according to the type of
IDE interface(s) installed in your system (PCI or ISA). Standard ISA
interrupts for IDE channels are IRQ14 for primary and IRQ15 for
secondary. The default value is
“PCI-AUTO” .
z Assign IRQ for USB
This item allows you to assign IRQ for the USB interface. The default
value is
“Enabled” .