Axiom SBC8156, User Manual

Page: 54 / 96

SBC8156 Pentium All-in-One CPU Card Series User’s Manual
Award BIOS Utility &1
.. 5!
/
#$% @
Auto Configuration : Enabled
DRAM Timing : 70ns Power-Supply Type : AT
Auto Detect DIMM/PCI Clk : Enabled
DRAM Leadoff Timing : 10/6/3 CPU Warning Temperature : Disabled
DRAM Read Burst (EDO/FP) : x222/x333 Current CPU Temperature : 29
o
C/84
o
F
DRAM Write Burst Timing : x222
Fast EDO Lead Off : Disabled
Refresh RAS# Assertion : 4 Clks
Fast RAS to CAS Delay : 3
DRAM Page Idle Timer : 2 Clks
DRAM Enhanced Paging : Enabled
Fast MA to RAS# Delay : 2 Clks
SDRAM (CAS Lat/RAS-to-CAS) : 2/2
SDRAM Speculative Read : Disabled
System BIOS Cacheable : Disabled
Video BIOS Cacheable : Disabled ESC : Quit ↑ ↓ → ← : Select Item
8 Bit I/O Recovery Time : 1 F1 : Help PU/PD/+/- : Modify
16 Bit I/O Recovery Time : 2 F5 : Old Values (Shift) F2 : Color
Memory Hole at 15M-16M : Disabled F6 : Load BIOS Defaults
PCI2.1 Compliance : Disabled F7 : Load Setup Defaults
z Auto Configuration
Auto Configuration selects predetermined optimal values of chipset
parameters. When disabled, chipset parameters revert to setup
information stored in CMOS. Many fields in this screen are not
available when Auto Configuration is enabled. The default value is
“Disabled” .
z
DRAM Timing
The value in this field depends on performance parameters of the
installed memory chips (DRAM). Do not change the value from the
factory setting unless you install new memory that has a different
performance rating than the original DRAMs. The default value is
“60ns” .