Axiom SBC8156, User Manual

Page: 60 / 96

SBC8156 Pentium All-in-One CPU Card Series User’s Manual
Award BIOS Utility 93
z
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part of
the time. You may select the percent of time that the clock runs. The
default value is
“62.5%”
.
z ZZ Active in Suspend
When Enabled, the ZZ signal is active during Suspend mode. The
default value is
“Disabled” .
z
VGA Active Monitor
When Enabled, any video activity restarts the global timer for Standby
mode. The default value is
“Enabled” .
z
Soft-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It
also allows the user to define which type of soft power OFF sequence
the system will follow. The default value is
“Instant-Off” .
Instant-Off
This option follows the conventional manner systems
perform when power is turned OFF. Instant-Off is a soft
power OFF sequence requiring only the switching of the
power supply button to OFF
Delay 4 Sec.
Upon turning OFF system from the power switch, this
option will delay the complete system power OFF sequence
by approximately 4 seconds. Within this delay period,
system will temporarily enter into Suspend Mode enabling
you to restart the system at once.
z
CPUFAN Off in Suspend
When Enabled, the CPU fan turns off during Suspend mode. The
default value is
“Enabled” .
z
Resume by Ring
This option allows the system to resume or wake up upon detecting
any ring signals coming from an installed modem. The default value is
“Enabled” .
z IRQ8 Break Suspend
You can turn on or off monitoring of IRQ8 (the Real Time Clock) so it
does not awaken the system from Suspend mode. The default value is
“Disabled”
.
z Reload Global Timer Events
When Enabled , an event occurring on each device listed below restarts
the global time for Standby mode.