Axiohm A714, Owner'S Manual

Page: 86 / 117

A714 Owner’s Guide Chapter 6: Commands
April 1998 77
Bar Code Commands Bar Code Commands
The commands listed in this section are:
•
Select Printing Position Of HRI Characters
•
Select Bar Code Check Characters
•
Select Font For HRI Characters
•
Select Bar Code Ratio
•
Select Bar Code Height
•
Print Selected Bar Code
•
Select Bar Code Horizontal Expansion
Select Printing Position of HRI Characters Select Printing Position of HRI Characters
Note: This command is not supported by the Axiohm A714 printer and is ignored.
Selects the location of the HRI (Human Readable Interpretation) characters when printing
a bar code.
Hexadecimal: Hexadecimal: 1B 48 n
Decimal: Decimal: 27 72 n
ASCII: ASCII: GS H n
Value: Value: n = printing position
Range: Range:
Hexadecimal: n = 00-03
n
= 30-33
Decimal: n = 0-3
n = 48-51
Default: Default: n = 0
Related Information Related Information
OPERAND DEFINITION OPERAND DEFINITION
nn (Hex) (Hex) nn (Decimal) (Decimal) Printing Position Printing Position
00, 30 0, 48 Not printed
01, 31 1, 49 Above the bar code
02, 32 2, 50 Below the bar code
03, 33 3, 51 Both above and below the bar code