Axiohm A714, Owner'S Manual

Page: 56 / 117

A714 Owner’s Guide Chapter 6: Commands
April 1998 47
Set Relative Vertical Position in Page Mode Set Relative Vertical Position in Page Mode
Note: This command is not supported by the Axiohm A714 printer and is ignored.
Sets the relative vertical print starting position to [(( n x 256) + m ) x horizontal or vertical
motion units] inches from the current position in page mode.
Hexadecimal: Hexadecimal: 1D 5C m n
Decimal: Decimal:
29 92
m n
ASCII: ASCII:
GS \
m n
Values: Values:
m
= the remainder of the position in dots
n = the integer of the position in dots
Ranges: Ranges:
Hexadecimal: m = 00-FF
n = 00-FF
Decimal:
m
= 0-255
n = 0-255
Defaults: Defaults: m = 0
n = 0
Related Information Related Information
A positive number indicates moving the cursor to the right, and a negative number
(specified by subtracting the number of dots from 65536) indicates moving the cursor to
the left.