Axiohm A714, Owner'S Manual

Page: 60 / 117

A714 Owner’s Guide Chapter 6: Commands
April 1998 51
Set Unidirectional Printing Set Unidirectional Printing
Selects unidirectional printing. This command will select bi-directional printing if
n
= 0
and unidirectional printing if n = 1. In unidirectional printing, the printer prints from
right to left. Use unidirectional printing to minimize horizontal line-to-line misalignment.
Hexadecimal: Hexadecimal: 1B 55 n
Decimal: Decimal: 27 85 n
ASCII: ASCII:
ESC U
n
Value: Value: n
= unidirectional printing select
Range: Range: n = 0 - 1
Default: Default: n = 0
Set Relative Starting Position Set Relative Starting Position
Sets the relative position. Sets the cursor to [((
n
x 256) +
m
) x 1/450] inches from the
current cursor position.
Hexadecimal: Hexadecimal: 1B 5C m n
Decimal: Decimal: 27 92 m n
ASCII: ASCII: ESC \ m n
Values: Values:
m = the remainder of the position in dots
n = the integer of the position in dots
Ranges: Ranges:
Hexadecimal: m = 00-FF
n = 00-FF
Decimal: m = 0-255
n = 0-255
Defaults: Defaults: m = 0
n
= 0
Related Information Related Information
A positive number means the cursor moves to the right, and a negative number (specified
by subtracting the number of dots from 65536) means the cursor moves to the left.