background image

AXI International reserves the right at any time to make changes in the design, material, function and specifications of its products. Any such changes shall not obligate

AXI International to make similar changes in such products that were previously manufactured. 

To the fullest extent permitted by law, any claims against AXI International are limited to the remedies as expressly set forth in this warranty and any other further 
claims, such as but not limited to, compensation for any damage incurred other than to the AXI International product, are hereby excluded.

Warranty Claim Procedure

To make a claim under this warranty, please call AXI International at +1-239-690-9589 or 1-877-425-4239, and provide: Name and location where unit was purchased,
the date and receipt of purchase, model number, serial number, and a detailed explanation of the problem you are experiencing. The Customer Service Representative

may, at the discretion of AXI International, arrange for a Field Engineer to inspect your system. If the inspection reveals a defect covered by its limited warranty, AXI

International will either repair or replace the defective parts or products. AXI International assumes no liability, if upon inspection, AXI International or its representative
determines that there is no defect or that the damage to the system resulted from causes not within the scope of this limited warranty and customer shall be
responsible standard rates incurred by AXI International, as established from time to time by AXI International.

For service and sales, please contact AXI International:

AXI International
5400 Division Drive

Fort Myers, FL 33905

Tel: +1-239-690-9589

Toll Free: +1-877-425-4239
Fax: +1-239-690-1195

Email: [email protected]
Internet: www.axi-international.com

Summary of Contents for STS 6000-P35





















Reviews: