background image

16

1

Introduction

We thank you for having purchased the Axair PH7. The
Axair PH7 is an all-season unit for air purification and air
humidification
.

These Operating Instructions will help you to fully benefit
from all features offered by the Axair PH7. This manual
contains all information required for the correct operation
and maintenance of the Axair PH7.

The Axair PH7 is designed in accordance with the latest
state of the art and the present safety regulations. In the
event of improper use, however, danger can arise for the
user or third parties and/or impairment of the unit or other
material assets. Please read and observe all safety
notes stated in the Operating Instructions of your Axair PH7.

If you have questions, which are not or insufficiently an-
swered in this documentation, please contact your Axair
representative. They will be glad to assist you.

2

Important notes

2.1

Intended use

The Axair PH7 is intended exclusively for air humidification
and air purification of rooms within the specified oper-
ating conditions
. Any other type of application is consid-
ered as not conforming with the intended purpose and may
lead to hazard when operating the Axair PH7.

Operation of the equipment in the intended manner requires
that all the information in these instructions is observed
(in particular the safety instructions)
.

2.2

Safety instructions

Carefully read and adhere to the instructionsdirec-
tions
 and notes given in the present Operating Instruc-
tions of the Axair PH7. Any improper use of the unit is
strictly forbidden.

The Axair PH7 must only be operated and serviced by
persons being familiar with the unit.
Persons not familiar with the Operating Instructions,
including children and persons under the influence of
alcohol, drugs or medicaments, must not operate the unit
unless under supervision.

Except for the steps mentioned in this manual, the user
must not carry out further operations with the Axair PH7.
All repairs (e.g. replacement of the mains cable or
replacement of the control unit etc.) must be carried
out by your Axair supplier only
.

Danger of electrical shocks! The Axair PH7 operates
at mains voltage:

observe all local safety regulations regarding the
handling of mains-powered electrical devices.

the fan housing incorporates all electrical compo-
nents. Never immerse the housing into water and
protect it from splashes.

Never remove the mains plug by pulling the power
cord. Make sure your hands are absolutely dry when
pulling the plug out of the socket.

Handle the mains cable (and the extension cord, if
used) with care: do not lead the cable over sharp
edges, do not jam it, do not strain it, do not place
it on hot surfaces and avoid contact with oil and
solvents
. Never use damaged cables or extension
cords!

Caution! Before cleaning and carrying out maintenance
work on the Axair PH7 switch the unit off and discon-
nect it from the mains
 (pull mains plug out of the socket),
then wait until the fan comes to a stop.

Caution!  Take appropriate measures to prevent chil-
dren from playing with the Axair PH7. Children are
unaware of the hazards associated with electrical appli-
ances. Never leave the unit running unsupervised. Nev-
er allow the mains cable to hang down.

Caution! Damaged units must not be set into opera-
tion
.

No technical modifications  must be applied to the
Axair PH7.

Use original spare parts from your Axair supplier exclu-
sively.

2.3

Notes on the Operating Instructions

This pictogram designates safety notes and dan-
ger references 
which, if not observed, may lead to
injury and/or material damage.

Please keep the Operating Instructions in a safe place
where they will be at hand whenever you need them.
If the Operating Instructions are mislaid, please contact
your Axair supplier for immediate replacement.

Summary of Contents for PH7















Reviews: