Award PCM-9371 User Manual Download Page 54 | Manualshive

Page: 54 / 154

background image

PCM-9371 User’s Manual

44

Chapter 5 PCI SVGA Setup

5.1 Introduction

The PCM-9371 has an onboard AGP flat panel/VGA interface. The spec-
ifications and features are described as follows:

5.1.1 Chipset

The PCM-9371 uses a VIA Twister 8606T chipset from VIA Technology
Inc. for its AGP/SVGA controller. It supports many popular LCD, and
LVDS LCD displays and conventional analog CRT monitors. The
VIA8606T VGA BIOS supports color TFT and DSTN LCD flat panel
displays. In addition, it also supports interlaced and non-interlaced analog
monitors (color and monochrome VGA) in high-resolution modes while
maintaining complete IBM VGA compatibility. Digital monitors
(i.e. MDA, CGA, and EGA) are NOT supported. Multiple frequency
(multisync) monitors are handled as if they were analog monitors.

5.1.2 Display memory

The Twister chip can support 8/16/32MB frame buffer shared with sys-
tem memory; the VGA controller can drive CRT displays or color panel
displays with resolutions up to 1280 x 1024 at 16 M colors.

5.1.3 Display types

CRT and panel displays can be used simultaneously. The PCM-9371 can
be set in one of three configurations: on a CRT, on a flat panel display, or
on both simultaneously. The system is initially set to simultaneous dis-
play mode. If you want to enable the CRT display only or the flat panel
display only, please contact VIA Technology Inc., or our sales representa-
tive for detailed information.

5.1.4 Dual/Simultaneous Display

The PCM-9371 uses a VIA Twister VT8606T LCD controller that is
capable of providing simultaneous dual view display of the same content
on a flat panel and CRT.
To set up dual view (simultaneus mode) under Windows 9x, Windows
ME, Windows NT/2000/XP, follow these steps:
1.

Open the Control panel, and select “Display”, “Settings”.

2.

Select " CRT+LCD " or " CRT+TV " for dual view

«
...
52
53
54
55
56
...
»

Summary of Contents for PCM-9371



























































































































































Reviews:

No comments

Related manuals for PCM-9371

Brand: Paradyne Pages: 22

Brand: National Instruments Pages: 28

Brand: National Instruments Pages: 19

Brand: National Instruments Pages: 103

NI PXI-1042 Series

Brand: National Instruments Pages: 12

Brand: National Instruments Pages: 4

JetWeb JX2-PR0FI1

Brand: Jetter Pages: 67

X-Pedition 2000

Brand: Enterasys Pages: 86

Brand: Fostex Pages: 20

Converter Board R0E5212BACFG00

Brand: Renesas Pages: 6

Easy Tool-ID BSG TID-05-T30-00-005

Brand: Balluff Pages: 46

memonizerWORKSTATION

Brand: MEMON Pages: 2

OMB-DAQBOARD-500 Series

Brand: Omega Pages: 48

Bolide BN-NVR/NX

Brand: GSA Pages: 101

Brand: Trend Micro Pages: 2

Brand: Grundfos Pages: 40

Brand: R.V.R. Elettronica Pages: 171

RJModem MT5656RJ

Brand: Multi-Tech Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands