Award PCM-9371 User Manual Download Page 124

Page: 124 / 154

PCM-9371 User’s Manual

114

Appendix B Installing PC/104 Modules

B.1 Installing PC/104 Modules

The PCM-9371's PC/104 connectors give you the flexibility to attach PC/
104 modules.
Installing these modules on the PCM-9371 is quick and simple. The fol-
lowing steps show how to mount the PC/104 modules:
1.

Remove the PCM-9371 from your system, paying particular atten-

tion to the safety instructions already mentioned above.
2.

Make any jumper or link changes required to the CPU card now.

Once the PC/104 module is mounted you may have difficulty in access-
ing these.
3.

Normal PC/104 modules have male connectors and mount directly

onto the main card. (Refer to the diagram on the following page.)
4.

Mount the PC/104 module onto the CPU card by pressing the mod-

ule firmly but carefully onto the mounting connectors.
5.

Secure the PC/104 module onto the CPU card using the four

mounting spacers and screws.

Summary of Contents for PCM-9371



























































































































































Search results

Summary of Contents for PCM-9371

Reviews:

Related manuals for PCM-9371

Brands by name

Popular brands

Award PCM-9371, User Manual

Search results

Summary of Contents for PCM-9371

Reviews:

Related manuals for PCM-9371

Brands by name

Popular brands