Page 5
Configure Your Light Tower Or Relay Switch
You may now navigate to another page; however, if you close the web interface before
the final step, you will lose your changes.
Now navigate to
Settings
Sensors
to associate your profile with a sensor.
1. Find your sensor’s interface and choose the profile you’ve configured from the drop-
down list in
Use Alarm Profile
.
2. Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
Manually Controlling Light Tower Or Relay Output
You may also control your Light Tower or
Relay Switch manually by navigating to
Settings
Status
in your Room Alert web
interface and scrolling down to the
Light
Towers and Relays
section. There you’ll see
the
Light Tower
or
Relay Status
box, both
shown here.
Click on the appropriate image to toggle
your device’s features on and off. Here
you see the red LED for the Light Tower
manually toggled on and the 1st relay on
the Relay Switch manually toggled on.
Light Tower
Relay
AVT-171211-1.1.0
www.serverroomenvironments.co.uk
