Page 3
Relay Switch Sensor (RMA-RELAY-SEN)
Previous Generation Relay Switch
Please note that the previous generation of the Relay Switch operates differently
than the current generation. In the previous generation model, shown below, you can
individually control the first three relay outputs; the fourth is automatically activated
when any one of the other outputs is on, allowing notification to a security panel.
Front
Relay
Ports
1
2
3
Alarm Panel Port
4
Custom
Cord
You can tell what generation you have by looking at the custom cord: the built-in
custom cord on the previous generation is approximately 1.375" long, as shown here.
(The current generation of Relay Switch has a built-in custom cord almost 4' long.)
AVT-171211-2.1.0