Avtech AVZ8136, User Manual

Page: 41 / 78

MAIN MENU
36
6.5.3 REGULAR REPORT
This function is used to send event reports to the specified E-mail address. Users could configure up to 5
profiles to receive different reports about specific channels at different time.
Note: This function is available only when a hard disk is installed, and the recorder is connected to
Internet.
You can configure up to 7 profiles and use one of them as your backup preference.
BACKUP
SOURCE DESTINATION
PROFILE PROFILE1 EVENT TYPE 4 SELECTED
ACTIVE ON
EXECUTION PERIOD WEEKLY EDIT E-MAIL ADDRESS
EXECUTION DAY OF WEEK MON tech_support@gmail.com
EXECUTION HOUR 1
CHANNEL √ ALL
CH1 CH2 CH3 CH4

CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16
APPLY
Step1: In
SOURCE
, choose the profile you’d like to save all the settings configured in
SOURCE
.
Choose how often and when you’d like to receive reports. Finally, make sure this profile is active
(
ACTIVE
to
ON
).
EXECUTION PERIOD
Select how often you want to receive reports:
MONTHLY
,
WEEKLY
or
DAILY
.
EXECUTION DAY OF MONTH
/
EXECUTION DAY OF WEEK
Depending on the option you selected in
EXECUTION PERIOD
:

EXECUTION DAY OF MONTH
shows when
MONTHLY
is selected.
Select one date from 1 ~ 31 to reboot.

EXECUTION DAY OF WEEK
shows when
WEEKLY
is selected. Select
one day from Monday ~ Sunday to reboot.
Step2: In
CHANNEL
, choose the channel(s) you want.
Step3: In
DESTINATION
, choose which event type(s) you want to see (
MANUAL
/
MOTION
/
ALARM
/
SYSTEM
/
TIMER
/
HUMAN DETECTION
).
Step4: Click to manually add an Email address to receive reports or to select from the E-mail address
list pre-defined in
NETWORK

E-MAIL
, to modify the selected Email address, and to remove
the selected Email address from the recipients list.
Step5: Click
APPLY
to confirm.