9
Step6: Select
CRUISE MODE
, and choose
SEQUENCE
. Then, go to
CRUISE CONFIG
to select
SETUP
.
SEQUENCE
ACTIVE NO:
1
ACTIVE TIME (MINUTES)
3
No1
PRESET
DWELL TIME
PAN SPEED
No2
01 No2
60
0
0
255
No3
02 No4
60
0
0
255
No4
03 No5
60
0
0
255
No5
>>
04 No1
60
0
0
255
No6
<<
05 No3
60
0
0
255
No7
No8
No9
No10
No11
No12
No13
No14
EXIT
ACTIVE TIME (MINUTES)
Select how long the area patrolling lasts in minute.
The options are 2, 3 and 5.
DWELL TIME
Select the time in second after which to move to the next point. The
time ranges from 3 to 60.
PAN SPEED
Select how fast to move the camera to the next point. The speed
ranges from 0 to 255.
Step6: Select
EXIT
, and right click to return to the live view.
Click the channel with this speed dome camera connected. Then, click
on the bottom left
side of the screen to show the PTZ control panel, and select
to start.
NOTE:
To stop camera panning, click
again to escape.
