To install the diode, spread apart one pair of spring pins with your fingers or tweezers,
and insert one end of the diode. Repeat on the other end.
This diode produced the following results (t
RR
= 341.9 ns):
5 V/div ( = 1 A/div), 200 ns/div.
20%-80% switching time shown.
S/N 11713. 60 cm cable used.
The photo below shows a reverse-polarity DO-5 diode (the Ruttonsha 40HF80)
installed between the four spring-loaded contacts (two for the anode end, and two for
the cathode end):
47
Summary of Contents for AVR-EB4-B
Page 69: ...PCB 158R5 LOW VOLTAGE POWER SUPPLY...
Page 71: ...PCB 104G KEYPAD DISPLAY BOARD...
Page 76: ...TEST JIG WIRING AVX TRR HPOST...
Page 83: ...PERFORMANCE CHECK SHEET 83...