Avtech AVR-EB4-B, Instructions Manual, Page: 28 / 83

STANDARD TEST JIG MECHANICAL ASPECTS
One AVX-TRR-MIX test jig is normally supplied with the mainframe, unless the
customer has requested a different or additional test jigs.
AVX-TRR-MIX TEST JIG
The AVX-TRR-MIX test jig accepts a range of through-hole and axial devices, using pin
sockets and spring-loaded pins. It is intended for use with diodes in DO-41, TO-220,
DO-204AR, TO-3 or similar packages. A photo of the arrangement is shown below:
28
Cathode Pins
Anode
Pins
N/C Pins
(no connection)
N/C Pins
(no connection)
Lid Closure
Safety Sensors