Avtech AVR-EB4-B, Instructions Manual, Page: 30 / 83

The IN, OUT, and CONTROL connectors are on the rear of the jig, below the hinges:
30
This spring pin must
contact the underside of
the case. It provides the
cathode connection.
The anode pin of
interest must be inserted
into this socket. For dual-
diode devices, rotate the
TO-3 package so that the
desired diode anode is
inserted here.
This socket and spring
pin provide mechanical
support only. They are
not electrically active.
For TO-3 packages
with Case = Cathode