24
Function
Description
Time Configuration
Date
Set the current date.
Time
Set the current time.
Daylight Saving Time Configuration
Daylight Saving Time
Specify whether to use daylight saving time (Enable / Disable).
If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight
saving time in hours (Adjust Time).
4.7.6 Smart Zoom / Digital Smart Zoom
Note:
“Smart Zoom” is available for AVN363; “Digital Smart Zoom is available for
AVN362.
Column
Description
Smart Zoom
To switch this function on or off, select “Enable” or “Disable”.
Or, it’s also available to click
to enable / disable this function on the live view panel.
Detection*
Select to set a specific detection area for this function.
Sensitivity
Select the digital smart zoom sensitivity (HIGH / MEDIUM / LOW)
Stand-by Interval
Select the stand-by interval (Short / Normal / Long).
*Aavailable for AVN362 only.
4.7.7 Calibration
Note:
This function is available for AVN363 only.
Go to this page to adjust the focus in each focal length.
When you finish the calibration, select “Storage” to save, or “Back to Default” to discard.
