Avtech AVN362 User Manual Download Page 2

 

 

IMPORTANT SAFEGUARD 

 

 

All lead-free products offered by the company comply with the requirements of the 

European law on the Restriction of Hazardous Substances (RoHS) directive, which means 

our manufacture processes and products are strictly “lead-free” and without the hazardous 

substances cited in the directive. 

 

The crossed-out wheeled bin mark symbolizes that within the European Union the product 

must be collected separately at the product end-of-life. This applies to your product and 

any peripherals marked with this symbol. Do not dispose of these products as unsorted 

municipal waste. Contact your local dealer for procedures for recycling this equipment. 

Trademark Acknowledgements 

iPhone® is the registered trademark of Apple Inc. 
BlackBerry® and related trademarks, names and logos are the property of Research In Motion Limited and 
are registered and/or used in the U.S. and countries around the world. Used under license from Research In 
Motion Limited. 
Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. 
Microsoft, Windows, Internet Explorer, Mozilla FireFox, Google Chrome, QuickTime, Windows Mobile & 
Symbian mentioned in this document are the registered trademarks of their respective holders. 

Disclaimer 

We reserve the right to revise or remove any content in this manual at any time. We do not warrant or 

assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The 
content of this manual is subject to change without notice. 

Trademark Acknowledgements 

Internet Explorer, Microsoft, Windows, Mozilla & QuickTime are registered trademarks of the respective 

holders. 

MPEG4 Licensing 

THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR 

THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN 
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING 
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND 
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY 
MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY 
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL 
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE 
HTTP://WWW.MPEGLA.COM. 

GPL Licensing 

 

This product contains codes which are developed by Third-Party-Companies and which 

are subject to the GNU General Public License (“GPL”) or the GNU Lesser Public License
(“LGPL”). 

The GPL Code used in this product is released without warranty and is subject to the 

copyright of the corresponding author. 

Further source codes which are subject to the GPL-licenses are available upon request. 
We are pleased to provide our modifications to the Linux Kernel, as well as a few new 

commands, and some tools to get you into the code. The codes are provided on the FTP 
site, and please download them from the following site or you can refer to your distributor:

http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz

 

 

Summary of Contents for AVN362




































Reviews: