SPECIFICATIONS
Model:
AVI-V-B-N-VCB
2
Amplitude (50Ω load required)
3
:
-5V to -50 V, variable
Rise time (20%-80%):
≤ 350 ps
Fall time (80%-20%):
≤ 1 ns
Pulse width (FWHM):
3 to 12 ns
Maximum pulse repetition
frequency (PRF):
20 kHz
Propagation delay:
≤ 250 ns
Polarity:
Negative
GPIB and RS-232 control
2
:
Standard on -B units
LabView Drivers:
Check
http://www.avtechpulse.com/labview
for availability and downloads
Jitter:
± 35 ps ± 0.015% of sync delay
Trigger required:
Ext trig mode: +5 Volts, > 50 ns (TTL)
Sync delay:
Sync out to pulse out: Variable 0 to 1s
Sync output:
+3 Volts, 100 ns, will drive 50 Ohm loads
Connectors:
Out: SMA, Trig: BNC, Sync: BNC, Monitor: SMA
Power required:
100-240 Volts, 50-60 Hz
Dimensions:
100 x 430 x 375 mm (3.9 x 17 x 14.8”)
Temperature range:
+5°C to +40°C
1) -C suffix indicates stand-alone lab instrument with internal clock and line powering. No suffix indicates miniature module requiring DC power and external trigger. (See
http://www.avtechpulse.com/formats
for details of the basic instrument formats).
2) -B suffix indicates IEEE-488.2 GPIB and RS-232 control of amplitude, pulse width, PRF and delay. (See
http://www.avtechpulse.com/gpib
).
3) For operation at amplitudes of less than 20% of full-scale, best results will be obtained by setting the amplitude near full-scale and using external attenuators on the output.
6
Summary of Contents for AVI-V-B-N-VCB
Page 43: ...PERFORMANCE CHECKSHEET 43...
