7. RS-232 Connector.
A standard serial cable with a 25-pin male connector can be
attached to this connector to allow the instrument to be computer-controlled. See the
“Programming Manual for -B Instruments” for more details on RS-232 control.
8. LAN Connector and Indicator
. (Optional feature. Present on -TNT units only.) The
-TNT option "Internet-enables" Avtech pulse generators by adding this standard
Ethernet port to the rear panel, in addition to the IEEE-488.2 GPIB and RS-232 ports
normally found on "-B" units. Commands are sent using the standard Telnet protocol.
The SCPI-compliant command set is the same as that used for GPIB and RS-232
control. The -TNT option uses the Dynamic Host Configuration Protocol (DHCP) to
obtain its network address. A DHCP server must be present on the local network for
the -TNT option to operate properly.
9. AMP Connector
. Not used.
19
Summary of Contents for AVI-V-B-N-VCB
Page 43: ...PERFORMANCE CHECKSHEET 43...
