FIRMWARE UPGRADE
-30-
APPENDIX 5 FIRMWARE UPGRADE
Note:
1). Before upgrading the camera firmware, please get the upgrade file from your distributor.
2). The upgrade must be implemented with a PC / laptop and our brand’s keyboard controller.
STEP 1: Connect the keyboard controller to your PTZ camera, and make sure the controller can control the
camera correctly.
STEP 2: Find the LAN port on the controller rear panel (as shown below), and connect the controller to a PC or
laptop with a RJ-45 network cable.
DC 12V
AUDIO
LAN
EXTERNAL I/O
DVR P.T.Z
STEP 3: Change the IP address of the PC or laptop to “192.168.1.xx”. “xx” should be 1~255 except 90 because
the default IP address of the controller is 192.168.1.90.
STEP 4: Unzip the upgrade file you received from your distributor on your PC or laptop, and execute the exe file
named “updata321_FB76.exe”. The upgrade process will start automatically.
STEP 5: When the upgrade is completed, the camera will restart automatically and show the new firmware
version.
Note:
Please do not disconnect the connection between the controller and the camera, and the
connection between the controller and the PC / laptop while the upgrade is in progress. Otherwise,
the upgrade will be failed.
Summary of Contents for 22X series
Page 7: ...INSTALLATION AND SETUP 3...
