manualshive.com logo in svg

AVProEdge AC-MX-88X, User Manual

Share
Download
AVProEdge AC-MX-88X User Manual Download Page 25

25

WebUI: System - Cloud Services

By enabling Cloud Services your device will have the ability to connect to firmware servers for over-the-air (OTA) updates and 

enable third-party remote management services.  If Cloud Services are disabled, your device will opt-out of any previously 

enabled services and will not be able to access OTA updates.

Before you can enable the cloud services you must first agree to the  “Privacy Policy”  and  “Terms of Use”.  
You can view these documents by clicking on Privacy Policy or Terms of Use  links, this will open up a PDF copy of that document 

in a new tab.

With the Cloud Services enabled you can use the System tab to check for new Firmware OTA (over the air).
This will check the firmware versions currently loaded on the AC-MX-88 and compare to the latest available.  If it is up to date, 

you will see a prompt stating “No update available!” click   CLOSE   to exit.

If an update is available a file will automatically be selected, simply click the  UPLOAD   button to load the firmware files to the 

Matrix.

NOTE: When loading firmware (depending on the firmware files that are being updated) some settings will revert back to Factory 

Defaults.  Take note of the I/O Config tab.  Settings like the INPUT/OUTPUT labels, EDID Settings, Video Scaling, Audio Settings, 

etc. as they will have to be re-applied after the firmware updates are completed.

If an update is available, the following prompt will show.  Simply click the  UPDATE  button to load.

Summary of Contents for AC-MX-88X


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands