Avocent MergePoint Unity, Installer/User Manual

Page: 56 / 97

• The Block Noise Threshold sets the minimum color change that occurs in a single video
block. Increasing the value reduces the network bandwidth. Decreasing the value makes
the size of these artifacts smaller.
• The Pixel Noise Threshold sets the minimum color change in a single pixel. Decreasing the
value reduces the number of low-contrast artifacts, but increases network bandwidth.
See Adjusting the View on page 43 for information about changing the color depth.
Mouse Settings
Adjusting mouse options
The Video Viewer window mouse options affect cursor type, Cursor mode, scaling, alignment
and resetting. Mouse settings are device-specific; that is, they may be set differently for each
device.
NOTE: If the device does not support the ability to disconnect and reconnect the mouse (almost all newer PCs do),
then the mouse will become disabled and the device will have to be rebooted.
Cursor type
The Video Viewer window offers five appearance choices for the local mouse cursor. You can
also choose no cursor or the default cursor.
In Single Cursor mode, the display of the local (second) cursor in the Video Viewer window
turns off and only the target device mouse pointer is visible. The only mouse movements that
appear are those of the target device remote cursor. Use Single Cursor mode when there is no
need for a local cursor.
48 MergePoint Unity® Switch Installer/User Guide