manualshive.com logo in svg

Avocent Cyclades ACS, Installation/Administration/User Manual

The Avocent Cyclades ACS is a powerful and reliable console server designed for easy installation and administration. With its comprehensive user manual available for free download from manualshive.com, users can quickly learn how to set up and manage their device effectively. Get your manual today and maximize the potential of your ACS.

Share
Download
background image

176

        Cyclades ACS Advanced Console Server Installation, Administration and User Guide

Appendix B: Safety, Regulatory and Compliance Information

The following safety, regulatory and compliance information for the ACS console server is 
described in this appendix. 

•

Safety and environmental guidelines for rack-mounting the console server

 on page 176

•

Safety precautions for operating the console server

 on page 178

•

Sicherheitsvorkehrungen beim Betrieb des Cyclades ACS

 on page 178

•

NEBS certification

 on page 179

•

Working inside the console server

 on page 180

•

Replacing the battery

 on page 181

•

Austausch der Batterie

 on page 181

•

Remplacement de la batterie

 on page 181

•

FCC warning statement

 on page 181

•

Notice about FCC compliance for all Cyclades ACS Advanced Console Server models

 on 

page 181

•

Canadian DOC notice

 on page 181

•

Aviso de Precaución S-Mark Argentina

 on page 182

•

Trabajar dentro del Cyclades ACS Advanced Console Server

 on page 182

Safety and environmental guidelines for rack-mounting the console server

NOTE: 

Each heading and its contents in this section is also provided in German (

Deutsch

) in italics immediately 

following the English version.

The following considerations should be taken into account when rack-mounting the Cyclades ACS 
advanced console server.

Folgendes sollte beim Rack-Einbau des Cyclades ACS berücksichtigt werden.

Temperature

The manufacturer's maximum recommended ambient temperature for the Cyclades ACS advanced 
console server is 122 ºF (50 ºC). 

Temperatur

Die maximal empfohlene Umgebungstemperatur des AlterPath ACS beträgt 50 ºC (122 ºF).

Elevated operating ambient temperature

If the console server is installed in a closed or multi-unit rack assembly, the operating ambient 
temperature of the rack environment may be greater than room ambient temperature. Therefore, 
consideration should be given to installing the equipment in an environment compatible with the 
manufacturer’s maximum rated ambient temperature. See above.

Summary of Contents for Cyclades ACS





















































































































































































































Reviews:

No comments

Related manuals for Cyclades ACS

Lantronix SLC8 Manager User Manual preview
SLC8
Brand: Lantronix Pages: 299
IBM xSeries 235 Maintenance & Troubleshooting preview
xSeries 235
Brand: IBM Pages: 214
Vxl Itona TC73yy Hardware User'S Manual preview
Itona TC73yy
Brand: Vxl Pages: 19
Crown USBX Operation Manual preview
USBX
Brand: Crown Pages: 12
Xyplex MAXserver 1600 Hardware Installation And Maintenance Manual preview
MAXserver 1600
Brand: Xyplex Pages: 58
Supermicro SUPERSERVER 2048U-RTR4 User Manual preview
SUPERSERVER 2048U-RTR4
Brand: Supermicro Pages: 152
TerraMaster NAS U8-111 Quick Start Manual preview
NAS U8-111
Brand: TerraMaster Pages: 13
MSI WindBOX Series User Manual preview
WindBOX Series
Brand: MSI Pages: 18
Rasilient ApplianceStor 75 User Manual preview
ApplianceStor 75
Brand: Rasilient Pages: 24
Gigabyte G492-ID0 User Manual preview
G492-ID0
Brand: Gigabyte Pages: 108
Advantech ASMB-977 Startup Manual preview
ASMB-977
Brand: Advantech Pages: 3
Advantech SKY-8101D User Manual preview
SKY-8101D
Brand: Advantech Pages: 38
San Telequip SC10E4IG_L User Manual preview
SC10E4IG_L
Brand: San Telequip Pages: 49
Thales SafeNet ProtectServer PCIe HSM 5.4 Installation Manual preview
SafeNet ProtectServer PCIe HSM 5.4
Brand: Thales Pages: 27
CryptoTelecom S-160 User Manual preview
S-160
Brand: CryptoTelecom Pages: 86
Analog way Picturall MST02-R1 Quick Start Manual preview
Picturall MST02-R1
Brand: Analog way Pages: 4
Black Box les1208A Manual preview
les1208A
Brand: Black Box Pages: 4
Black Box LES1202A Quick Start Manual preview
LES1202A
Brand: Black Box Pages: 12

Brands by name

Popular brands

Load more brands