Avocent Cyclades ACS, Installation/Administration/User Manual

Page: 78 / 212

62 Cyclades ACS Advanced Console Server Installation, Administration and User Guide
The following table describes the information viewable on the View IPDUs Info form. The
information shown in the table appears for each serial port configured for power management.
You can view the following information about each IPDU configured through a serial port.
Table 6.5: Expert - View IPDUs General Information
Form Heading Description Example
Name Either a default name or administrator-configured
name appears. IPDU
Number of units The number of IPDUs connected to the port. The
first IPDU is referred to as the master. Any other
IPDUs daisy-chained off the first IPDU are
referred to as slaves. Two IPDUs daisy-chained
through the Serial Port 1
Number of outlets Total number of outlets on all connected IPDUs. Sixteen for two Model PM8
15A IPDUs daisy-chained
through Serial Port 1
Buzzer Whether a buzzer has been configured to sound
when a specified alarm threshold has reached. ON when the buzzer
is configured
Syslog Whether syslogging has been configured for
messages from this IPDU. ON when syslogging
is configured
Over Current Protection Whether over current protection is enabled. Over
Current Protection prevents outlets from being
turned on if the current on the IPDU exceeds the
specified threshold. OFF when over current
protection is not enabled
Table 6.6: Expert - View IPDUs Unit Information
Form Heading Description Example
Model IPDU model number PM8 15A
Software Version IPDU firmware version 1.5.0
Alarm Threshold Number of amperes that trigger an alarm or syslog
message when it is reached 15.0A
Current Current level on the IPDU 0.0A
Maximum Detected Maximum current detected 0.4A
Clear Max Detected Current Button to reset the maximum detected current value.
Temperature Temperature on the IPDU (displayed if equipped with a
temperature sensor.) N/A