Avocent Cyclades ACS Installation/Administration/User Manual Download Page 116

Page: 116 / 212

100

Cyclades ACS Advanced Console Server Installation, Administration and Users Guide

Edit button

Selecting one of the default chains and pressing the

Edit

button, the Edit Chain dialog box shown in

the following figure appears.

Figure 7.14: Expert - Firewall Configuration Edit Chain Dialog Box

Only the policy can be edited for a default chain. The options are ACCEPTand DROP.

NOTE:

User-defined chains cannot be edited. If a user-defined chain is selected for editing, an error message is

displayed. If this message appears, click

to continue.

Figure 7.15: Firewall Configuration User-defined Chain Message

Delete button

If one of the user-defined chains is selected and the

Delete

button is pressed the chain is deleted.

NOTE:

Default chains cannot be deleted. If one of the default chains is selected and the Delete button is

pressed, an error message is displayed. If this message appears, click

to continue.

Add button

If the

Add

button is pressed under, the Add Chain dialog box shown in the following figure appears.

Figure 7.16: Expert - Firewall Configuration Add Chain Dialog Box

Summary of Contents for Cyclades ACS





















































































































































































































Search results

Summary of Contents for Cyclades ACS

Reviews:

Related manuals for Cyclades ACS

Brands by name

Popular brands

Avocent Cyclades ACS, Installation/Administration/User Manual

Search results

Summary of Contents for Cyclades ACS

Reviews:

Related manuals for Cyclades ACS

Brands by name

Popular brands