Chapter 9: Ports Menu and Forms
137
1.
Go to
Ports - Physical Ports
in Expert mode, select a port or ports to modify, click the
appropriate Modify Ports button. The General form appears.
2.
Click the
General
tab. The General form appears with the number(s) of the selected port(s)
next to the Done button at the bottom of the form and the active tabs are yellow.
3.
To change the connection protocol, select Bidirectional Telnet from the Connection Protocol
pull-down menu.
4.
If you wish to change any of the other current settings, see
To configure serial port settings to
match the connected devices:
on page 139.
5.
Go to the
Access
tab and configure the following settings:
a.
In the Authorized Users/Groups field restrict or deny access to a serial port by specifying
one or more users or groups.
b.
From the Type pull-down menu, select an authentication type for the serial port. The
default is no authentication (Type=None).
c.
In the BidirectionLogin Timeout field enter the time for the serial port to return to idle
state. When the user name is not entered in the terminal window after the login banner is
displayed, the serial port returns to an idle state. The default timeout value is 60 seconds.
d.
In the BidirectionShell Command field enter the menu shell command, for example, /bin/
menush to build a custom menu for the TS profile.
6.
To customize a menu shell, go to Web Manager - Applications - Terminal Profile Menu form.
For more information on configuring a menu shell see
Chapter 6, “Terminal Profile menu”
on
page 74.
To configure a serial port connection protocol for a terminal server:
This procedure assumes that the selected serial port is physically connected to a terminal. For more
information on Terminal Server connection protocols see
Terminal Server (TS) profile connection
protocols
on page 134.
1.
Go to
Ports - Physical Ports
in Expert mode, select a port or ports to modify, click the
appropriate Modify Ports button.The General form appears.
2.
Click the
General
tab. The General form appears with the number(s) of the selected port(s)
next to the Done button at the bottom of the form and the active tabs are in yellow.
3.
To change the connection protocol, select a Terminal Server connection from the Connection
Protocol pull-down menu, Telnet, SSHv1, SSHv2, Local Terminal or Raw Socket.
4.
To configure a terminal to automatically connect to the console server, perform the
following steps:
a.
Select
Local Terminal
from the Connection Protocol pull-down menu.
b.
Define a terminal profile menu. Terminal Profile Menu form is at Expert - Applications -
Terminal Profile Menu.
5.
To configure a terminal to automatically connect to a server, perform the following steps:
Summary of Contents for Cyclades ACS
