Avnet Xilinx Virtex-II User Manual Download Page 10

Page: 10 / 25

Avnet Design Services

10 of 25

Rev 1.0 06/08/2004

Released

Literature # ADS-xxxx04

JP16 – 50-pin FPGA general purpose header I/O.

JP17 – 20-pin FPGA general purpose 2.5V I/O header.

JP18 – 20-pin FPGA general purpose 3.3V I/O header.

JP19– 20-pin FPGA general purpose memory header.

JP100- JTAG Chain configuration. Selects the JTAG chain configuration. Install a jumper across pins 2-3 for standalone

mode (3 devices in chain: System ACE, Virtex-II, and PCIX). Install jumpers across pins 1-2 and pins 4-5 to add the AvBus

connector labeled “P2” on to the standalone chain. Install jumpers across pins 1-2, pins 3-4 and pins 5-6 to add the AvBus

connector labeled “P3” on to the standalone chain. These settings are described in detail in the Hardware section of this

manual (see section 3.11).
Default: Installed across pins 2-3; standalone chain mode.

JP101 – JTAG TCK Enable for JTAG Connector "P2". Default Closed.

JP102 – JTAG TCK Enable for JTAG Connector "P4". Default Closed.

JP103 – System ACE Test Control Address. The MPM file in the System ACE can hold 8 different designs, which are selected

by setting the controller address. The address is set by installing shunts/jumpers on JP103. For a description of the test files
see Section 4.0

JP104– System ACE Device Disable. Default Open.

JP904 – JTAG bypass ties board TDI to TDO, bypassing all devices. Default Open, JTAG chain enabled.

J100 – Active Heatsink Power.

J102 – 50-pin general purpose System ACE header.

J103 – Connector for Power Supply Daughter board.

Summary of Contents for Xilinx Virtex-II


























Search results

Summary of Contents for Xilinx Virtex-II

Reviews:

Brands by name

Popular brands

Avnet Xilinx Virtex-II, User Manual

Search results

Summary of Contents for Xilinx Virtex-II

Reviews:

Brands by name

Popular brands