Avnet AES-ATT-M18QWG-SK-G, Hardware User'S Manual

Page: 52 / 52

Page 52
12 Appendix A
– LTE IoT Breakout Carrier
The
LTE IoT Breakout Carrier is an optional expansion board that facilitates system-level prototyping
using the Global LTE IoT Starter Kit
Via it’s Samtec ERM8 series 60-pin connector, a subset of the WNC LTE module’s peripheral interfaces
(signaling at 1.8V levels) are level-shifted to 3.3V levels and pinned-out to two Click Module sockets for
which over 300 different
MikroElekronika Click peripheral modules are available for purchase from Avnet.
Features:

Access to key peripheral interfaces of LTE System Module via 60 pin Samtec ERM8 series
connector (10mm mated connector height. 10mm standoffs required for mounting of LTE Board)

Level-shifting of the WNC module signals to/from 1.8V / 3.3V levels

Dual sockets for two MikroE Click peripheral modules (available from Avnet)

Flexible system prototyping via a choice of over 425 Click peripheral modules

External control of LTE System board power-down and sleep modes

Additional level-shifted GPIO (or PCM Digital Audio) signals (four pins)

Onboard 3.3V and 1.8V voltage regulators
Figure 20
– LTE IoT Breakout Carrier (plus Click Modules)
LTE IoT Breakout Carrier details and ordering info available at:
http://cloudconnectkits.org/product/lte-iot-breakout-carrier