Avnet AES-ATT-M18QWG-SK-G, Hardware User'S Manual

Page: 48 / 52

Page 48
6 Shipping, Handling and Storage
6.1 Shipping
Bulk orders of AES-ATT-M18QWG-M1-G LTE System boards are delivered in trays of TBD units.
6.2 Handling

The AES-ATT-M18QWG-M1-G LTE System board contains sensitive electronic circuitry that
requires proper ESD protection when handling. Failure to follow these ESD procedures may
result in permanent damage to the module.

The module should not be subjected to excessive mechanical shock.
6.3 Storage

Per J-STD-033, the shelf life of devices in a Moisture Barrier Bag is:
12 months at <40ºC and <90% room humidity (RH).

Do not store in salty air or an environment where there is a high concentration of corrosive gas,
such as Cl2, H2S, NH3, SO2, or NOX.

Do not store in direct sunlight.
7 Safety Recommendations
Be sure the use of this product is authorised for use in the country and environment where is operated.
The use of this product may be hazardous and must be avoided in areas:

Where it can interfere with other electronic devices, eg in hospitals, airports and aircraft

Where there is a risk of explosion such as gasoline stations and oil refineries
It is the responsibility of the user to comply with their country’s regulations and environmental regulations.
Do not disassemble the product; any mark of tampering will compromise the warranty’s validity.
It is recommended the instructions in this hardware user guide be followed for correct wiring of the product.
The product must be supplied with a reliable voltage source, and wiring must conform to the security and
fire-prevention regulations.
This product must be handled with care; avoid contact the possibility of electrostatic discharge which may
damage the product. Same caution must be taken regarding the UIM card; carefully check the instructions
for its use. Do not insert or remove the UIM when the product is in power-saving mode.
The system integrator is responsible for the functioning of the final product. Care must be taken with the
circuitry external to the module as well as for project or installation issues
—there may be a risk of disturbing
the cellular network or external devices or of having an impact on device security. If you have any doubts,
please refer to the technical documentation and the relevant regulations in force.
Every module must be equipped with a proper antenna of the specified characteristics. The antenna must
be installed with care in order to avoid any interference with other electronic devices.