Page 11
Table 1
– Summary of Key Specifications for LTE System Board
Product Parameter
Relevant Characteristics
MSRP
$99 @ 100+ units
Description
Embedded LTE and GPS system board offering two modes of operation:
- Host mode
- Modem mode (aka Slave mode. No Avnet support for this mode currently)
Application Interface
WNC API (Host mode only)
WNC AT Commands
Cellular Technology
LTE Cat.4, bands 1/3/7/8/20/28/38/40 (up to 150/50 Mbps DL/UL)
WCDMA, bands 1/8, 3GPP release 8
GSM, E-GSM 900, DCS 1800
GNSS Location Tracking
GPS, GLONASS (-162 dBm tracking sensitivity)
Peripheral Interfaces
HS USB 2.0 w/ PHY, SGMII, HSIC, UARTs (4 wire and 2 wire),
SDC1/SPI1, I2C/SPI2, USIM, GPIOs, ADC, PCM/I2S, JTAG
Power Consumption
See datasheet (utilizes power-efficient ARM Cortex-A7 technology)
Supply Voltage
4.5 V to 16 V DC
Expansion Interfaces
Pmod™-compatible connector (3.3V levels, 2x6 pin, 2.54 mm pitch)
SAMTEC ERM8 60pin connector (1.8V levels, 2x30pin, 0.8 mm pitch)
End-Device Certified
Regulatory and network certifications planned for Europe only
Data Service
Starter SIM includes:
- 100K data points on AT&T M2X service,
- 200 SMS messages,
- good for 60 days from activation
Data Interface
N/A in Host mode
Dimensions (mm)
79.5mm x 30 mm
Warranty
1 year
Summary of Contents for AES-ATT-M18QWG-SK-G
