manualshive.com logo in svg

AvMap EKP IV, User Manual, Page: 92 / 102

Share
Download
AvMap EKP IV User Manual Download Page 92

94

User Manual

cursor key to select the RAM Menu and press ‘ENTER’ to select RAM Test or

RAM Clear.

• 

RAM Test

‘ENTER’ on RAM Test to verify the integrity of the RAM. If the message

“ERROR” appears the RAM is physically damaged.

• 

RAM Clear

‘ENTER’ on RAM Clear to to activate, press ‘ENTER’ again to confirm (at

this time if you do not wish to clear RAM press ‘CLEAR’).

This operation will erase all Marks, Flight Plans, stored Track plots and desti-

nations. It will also return all selections (Input Data Format, selective display

etc.) to original default values.

15.5.2 C-CARD menu

To check the Compact Flash and its connector.

• 

 Compact Flash Test

To test the Compact Flash. There are the following possible situations:

1. If there is a Compact Flash inserted in the slot and there is not a malfunc-

tion, the name of the Compact Flash zone and the message “OK” are shown.

2. If there is a Compact Flash inserted in the slot, but it is a damaged Compact

Flash, the name of the Compact Flash zone and the message “Faulty” are

shown.

3. If there is not any Compact Flash inserted in the slot, the message “not

present” is shown.

4. If there is an User Compact Flash inserted in the slot, the message “USER

CARTRIDGE” is shown.

•  

C-CARD Connector

Indicates if there is a malfunction in the connector. It is used only in production.

15.5.3 SERIAL PORTS

If you are having problems receiving data from the position-finding instru-

ment, this test should help determine the problem.

• 

 

Change Parameters

To change the parameters of the serial interface. This menu allows to select the

Port 

(Signal Source) between UART0 or UART1, the 

Baud Rate 

between

4800 or 9600, the 

Data Bits 

(Word Length) between 7 or 8, the 

Parity 

between

EVEN, ODD or NONE, the 

Stop Bits 

between 1 or 2, the 

Polarity 

between

“+” or “-”. Default settings are: Port = UART1, Baud Rate = 4800, Data Bits

= 8, Parity = NONE, Stop Bits = 1, Polarity = +.

• 

 

Input Data Display

To allow the chart plotter to act as a computer terminal and display the incom-

ing data exactly as it received.

Summary of Contents for EKP IV







































































































Reviews:

No comments