AvMap EKP IV User Manual Download Page 67

Page: 67 / 102

User Manual

Fig. 10.4a - Vertical Navigation function

Vertical Navigation can be activated (On) only if a Flight Plan is active (desti-

nation present).

Destination point for Vertical Navigation is the last point of the Route or

destination of GoTo mode.

Prior to the Descent Point being reached the Distance To Go displays TO,

Time To Go to Descent point and Descent Rate from the current position.

After passing Descent point the system displays TO, Time To Go to the Des-

tination and Target altitude based on actual descent profile. Time To Descent

or Target ALT values can be displayed in the Data Window of Moving Map

and HSI modes.

The Vertical Navigation value displayed in the HSI is calculated as a difference

between current altitude (from GPS) and Target altitude.

10.5 WIND CALCULATION

The Wind Calculation feature computes winds aloft by comparing Ground

Speed and Track with indicated heading, indicated air speed and Outside Air

Temperature.

> ‘MENU’ 1 sec. + “CALCULATOR” + ‘ENTER’ + “WIND CALCULATION” + ‘ENTER’

User data is entered in the fields at the bottom half of the screen. To set Wind

Calculation parameters use ‘ENTER’ to edit the selected field (a box appears

around the active field) and the cursor key to move between fields. Press

‘CLEAR’ to return to Calculator menu.

NOTE

This function works best when the airplane is straight and level.

Summary of Contents for EKP IV







































































































Search results

Summary of Contents for EKP IV

Reviews:

Related manuals for EKP IV

Brands by name

Popular brands

AvMap EKP IV, User Manual

Search results

Summary of Contents for EKP IV

Reviews:

Related manuals for EKP IV

Brands by name

Popular brands