AvMap EKP IV User Manual Download

Page: 74 / 102

User Manual

>‘MENU’ 1 sec. + “SIMULATOR” + ‘ENTER’ + “SPEED” + ‘ENTER’

Using the cursor key select the desired Speed and press ‘ENTER’.

Speed can be adjusted during the simulated flight.

>“SIMULATION MODE” + ‘ENTER’ + ‘ROUTE’ + ‘ENTER’

Once the settings are selected, turn on the Simulator:

>“SIMULATION” + ‘ENTER’ + “ON” + ‘ENTER’

The simulated aircraft position will now fly the active Flight Plan from the

first Waypoint. All functions of the EKP-IV will work as in normal flight ex-

cept for Altitude related functions.

NOTE

As stated earlier, in the Simulation mode the EKP-IV retains full functionality. It is recommended

that the Simulator be used to experiment with the full range of capabilities contained within the

EKP-IV so that you may get the most out of it when used in the cockpit.

12.3 TURNING THE SIMULATOR OFF

The Simulator may be turned Off and the EKP-IV returned to normal opera-

tion as follows:

>‘MENU’ 1 sec. + “SIMULATOR” + ‘ENTER’ + “SIMULATION” + ‘ENTER’ + “OFF” + ‘ENTER’

If the EKP-IV had a position fix before the Simulation mode was entered, then

normal operation will resume. If there was no position fix, the EKP-IV begins

a satellite search and should obtain a position fix in the same manner as normal

start-up.

Summary of Contents for EKP IV







































































































Search results

Summary of Contents for EKP IV

Reviews:

Related manuals for EKP IV

Brands by name

Popular brands

AvMap EKP IV, User Manual

Search results

Summary of Contents for EKP IV

Reviews:

Related manuals for EKP IV

Brands by name

Popular brands