5.2.3 SEND BASE PROGRAM
5.2.4 CHANGE ID NUMBER ON THIS BASE
Enter this menu to send to the BASE the ACTIVATION settings of the KEY.
Enter this menu to modify the ID number of the BASE connected. Selecting a different ID number for each
BASE allows the wise user identifying the desired BASE when they are situated close one another and all
can be reached by the KEY radio range. If all BASES have the same ID number, the user cannot distinguish
among them. Modify the ID number of the BASE to identify each one.
Press the
OK button
to enter and use the
arrow buttons
to change the ID number. Press the
OK button
to save the new settings. When the process is over the KEY goes back to “change ID number” submenu.
Press the
ESC button
to go back to the source menu.
Press the
ESC button
to go back to the source menu.
Press the
OK button
to start overwriting the BASE memory. Once the operation is concluded the following
message appears:
Press the
ESC button
to go back to the source menu.
Base
SEND PROGRAM
TO BASE
OK=EXEC ESC=EXIT
Base
SENDING SETUP
COMPLETED
ESC=EXIT
Base
CHANGE ID NUMBER
ON THIS BASE
OK=ENTER ESC=EXIT
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK | IOM Manuals
16
ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879
M117 VALVE TIMER HKEY - ver. 1.6
ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309
