4.2 OPTION 2) “BASE” AUTOMATIC MODE
4.2.1 “BASE” AUTOMATIC MODE (WAITING FOR ACTIVATION)
… and it will be visible during the whole activation (about 30 sec. generally).
Finally, once the valve has been activated, the following message will be displayed:
00:12 indicates the time passed from the ACTIVATION start (h: min).
To stop the manual ACTIVATION at any time, press the
OK button
. A first message is displayed “ACTIVATION
FINISHED” followed by a second message “DEACTIVATION IN PROGRESS”. The message is visible for the
whole operation (about 30 sec. generally). The KEY goes back to the LAUNCH menu.
The automatic program is running. The BASE ACTIVATES and DEACTIVATES the valve independently
following the program set up.
Note:
When the automatic mode is running, a manual interruption switches the device from automatic
mode to manual mode (option 1).
The KEY displays the following message when the BASE is waiting for the next automatic activation:
Press the
ESC button
to enter the BASE Menu (see BASE Menu chapter).
Press the
OK button
to switch from automatic mode to manual mode (option 1).
After the “ACTIVATION FINISHED” message the KEY goes back to the LAUNCH menu.
00051
Activated in
MANUAL MODE
Passed time
00:12
OK=STOP ESC=EXIT
00051
WAITING ACTIVAT.
OK=STOP ESC=MENU
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK | IOM Manuals
12
ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879
M117 VALVE TIMER HKEY - ver. 1.6
ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309
