5.2 BASE SET UP MENU
5.2.1 DISPLAY BASE PROGRAM
5.2.2 COPY BASE PROGRAM
Once entered the BASE set up menu the following submenus appear:
•
DISPLAY BASE PROGRAM
•
COPY BASE PROGRAM
•
SEND PROGRAM TO THE BASE
•
CHANGE ID NUMBER ON THIS BASE
•
RESTORE THE BASE TO FACTORING SETTINGS
Entering this menu, the KEY connects to the BASE and displays the following message:
Enter this menu to overwrite the KEY program with the BASE program. This operation cancels all data
recorded in the KEY but allows copying the BASE program in other BASES.
The information in this menu is the same contained in Display BASE program menu with the addiction of
the command “OK=SAVE”. Press the
OK button
to allow the KEY to overwrite the data contained in the
Program menu with the data contained here. The message “COMMAND EXECUTED” confirms the operation
has concluded successfully.
Press the
ESC button
to go back to the source menu.
The message resumes the BASE program.
Press the
down arrow button
to display the parameters programmed on the BASE (threshold, hysteresis,
pulse weight and meter type).
Press the
ESC button
to go back to the source menu.
Turns on Base
Sun Mon Tue Wed Thu Fr Sa
0 2 3 3 + 1 0
t1 10:00 x 02:05
t2 15:45 x 00:10
t3 19:30 x 00:45
ACMO-AVK | IOM Manuals
15
ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879
M117 VALVE TIMER HKEY - ver. 1.6
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309
