4.2.2 “BASE” AUTOMATIC MODE (ACTIVATED)
4.3 OPTION 3) “BASE” LOW BATTERY LOCK
The KEY displays the following message after the automatic mode activates the solenoid:
When the BASE battery is low, the BASE stops the ACTIVATION and locks itself. Turn off the BASE and
replace the battery. The KEY displays the following message:
Press the
ESC button
to go back to the “BASE connection menu” without selecting any option.
Press the
OK button
to display the following message:
01:21 indicates the time passed from the automatic ACTIVATION start (h: min).
Press the
OK button
to stop the automatic ACTIVATION at any time. A first message is displayed
“ACTIVATION FINISHED followed by a second message “DEACTIVATION IN PROGRESS” visible during the
whole activation (about 30 sec. generally).
Note:
When the automatic mode is running, a manual interruption switches the device from automatic
mode to manual mode (option 1). After the “DEACTIVATION IN PROGRESS” message, the KEY goes back
to the LAUNCH menu.
00051
Activated in
AUTOMATIC MODE
Passed time
01:21
OK=STOP ESC=EXIT
00051
BATTERY ALARM
LOCKED BASE
Base
BATT CHANGE?
OK=YES ESC=NO
ACMO-AVK | IOM Manuals
13
ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879
M117 VALVE TIMER HKEY - ver. 1.6
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309
