5.0 BASE MENU
5.1 AUTOMATIC MODE MENU
Once in the BASE Menu, the KEY displays the following message:
Depending on the state of the BASE, once entered this menu one of the following message appears:
The message shows the mode selected (automatic or manual).
Press the
OK button
to switch from one mode to the other.
After each switch the “COMMAND EXECUTED” message appears.
Press the
ESC button
or the arrow button to go back to the source menu.
Press the
ESC button
to disconnect.
Press the
OK button
to go back to the BASE set up menu (see BASE set up menu chapter).
Use the
arrow button
to scroll the menus.
Press the
ESC button
to go back to the “BASE connection menu” without selecting any option.
Press the
OK button
to turn off the BASE and display the following message:
Now the BASE is out of reach and ready for battery replacement.
BASE
DEACTIVATED
Menu
BASE SETUP
MANAGEMENT
OK=ENTER ESC=EXIT
Menu
AUTOMATIC MODE
SWITCH ON?
OK=EXEC ESC=EXIT
Menu
AUTOMATIC MODE
SWITCH OFF?
OK=EXEC ESC=EXIT
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK | IOM Manuals
14
ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879
M117 VALVE TIMER HKEY - ver. 1.6
ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309
