Operator Manual, Supercharger 60
R3.0
Page 14 of 62
3.1.12.1.
3 AMPS idling plus ½ the value of the charging current; e.g. when
charging 40 AMPS the line current is 23 AMPS (Note: nominal values,
line voltage and frequency dependent).
3.2
DISCHARGE
3.2.1.
CONTROL: Transistors, air cooled.
3.2.2.
MAXIMUM CURRENT:
3.2.2.1.
60 AMPS. Total power dissipation must not exceed 1.2KW (1200
watts, the product of battery voltage and battery current).
3.2.2.2.
NOTE: Discharge current is automatically limited to 30 AMPS for
battery voltages in excess of 32 VOLTS. A current fault will be
generated if attempting to discharge at more than 30 AMPS.
3.2.3.
MINIMUM INCREMENT:
3.2.3.1.
0.1 AMP.
3.2.4.
ACCURACY and STABILITY of settings:
3.2.4.1.
±1% of reading, ±0.1AMP.
3.2.5.
MODES:
3.2.5.1.
Analysis (automatic cut-off)
3.2.5.2.
Deep cycle (full discharge).
Summary of Contents for Supercharger 60
