manualshive.com logo in svg

Avision FL-1401B, User Manual

Share
Download
Avision FL-1401B User Manual Download Page 87

User’s Manual

 

 

 

8-1 

8.

 

Using the Product as a 
Regular Scanner 

 
 

8.1

 

Installing the Scanner Driver  

NOTE:  

1).

 

To ensure your computer can identify the USB scanner, 

please install scanner driver first before connecting the 

scanner to your computer.

 

2).

 

The scanner driver contains TWAIN, and WIA driver.  After 

the installation of scanner driver is completed, this scanner 

allows you to scan via a TWAIN, ISIS, or a WIA interface.  

Start your TWAIN-compliant image editing software 

application to select a TWAIN or WIA user interface or your 

ISIS software to select an ISIS user interface.  You may 

also launch Microsoft’s Scanner and Camera Wizard to scan 

via a WIA user interface. 

 

1.

 

Place the supplied CD-ROM onto your CD-ROM drive. 

2.

 

The software installation graphic appears.  If not, run 

“setup.exe”. 

 

Summary of Contents for FL-1401B















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands