manualshive.com logo in svg

Avision FL-1401B, User Manual

Share
Download
Avision FL-1401B User Manual Download Page 125

User’s Manual

 

 

 

9-31 

 

 

 

Original 

 

Auto/Remove Green 

(normal mode)

 

 

Remove Red (normal 

mode)

 

 

Remove Green (quality 

mode: Threshold: 18)

 

 

Preview the color dropout result:   

To preview the color dropout result, please follow these steps: 

1.

 

Click the [Scanner Properties] icon (

) on the upper 

left corner, and choose [Tab] to show available tab 

names. 

2.

 

Choose [Preview] to show the Preview tab. 

3.

 

Click the [Preview] tab to show the Preview page. 

4.

 

Load your document to the scanner and click the 

[Preview] button to get a preview image. 

5.

 

On the [Image] tab, click [Gray] or [Black and White] 

image mode and then choose [Custom] on the [Color 

Dropout] tab. A [Preview window] button will be 

displayed. 

6.

 

Click the [Preview window] button to prompt the 

[Preview] window with the previewed image. 

Summary of Contents for FL-1401B















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands