Avision FL-1401B User Manual Download Page 156

Page: 156 / 206

User’s Manual

9-62

Rotate

Image

Choose the rotation angle from the drop down

list if you wish to rotate your scanned image.
Choice: None, 90°CW(clockwise),

90°CCW(counter clockwise), 180°, Auto

based on contents. Auto rotate every

even page.

Original

Rotate 90°CW

Rotate 90°CCW

Rotate 180°

Auto based on contents: Automatically

rotate images based on the contents of
document. When

「

Auto based on

contents

」

is selected, its modes will be

enabled to let you select more options.
Mode: Quick, Full Text, Complexity
Quick – the default mode to let you rotate

images at the fastest speed.
Full Text – the enhanced mode for

documents with mixed text orientation.

Complexity – the enhanced mode yet at the

slowest speed for document with complex

image or text orientation.

Summary of Contents for FL-1401B















































































































































































































Search results

Summary of Contents for FL-1401B

Reviews:

Brands by name

Popular brands

Avision FL-1401B, User Manual

Search results

Summary of Contents for FL-1401B

Reviews:

Brands by name

Popular brands