Avision FF-0803S User Manual Download Page 54

Page: 54 / 116

4.4

The Color Dropout Tab

4.4.1

Color Dropout Selection

Color Dropout tab allows you to drop either of the red, blue, or

green color in your scanned image. If your image contains red

color watermark or background, choose the R (Red) channel

then any red watermark or background will be removed. This

feature is used to sharpen your text when using OCR (Optical

Character Recognition) software.
The “Custom” option allows you to specify your desired color to

be removed by entering its RGB (Red, Green, and Blue) value

respectively.

Tolerance: Specify the allowable color range to be removed for

the color you selected. Specified range: 1 ~ 100

The large the numeric value, the wider the color dropout range

is.

Note that this function supports only black & white and gray
images. Therefore, be sure to choose any black & white or
gray image type while applying this function.

4-25

Summary of Contents for FF-0803S





















































































































Search results

Summary of Contents for FF-0803S

Reviews:

Brands by name

Popular brands

Avision FF-0803S, User Manual

Search results

Summary of Contents for FF-0803S

Reviews:

Brands by name

Popular brands