Avision FF-0803S User Manual Download Page 112

Page: 112 / 116

8.2

Frequently Asked Questions

Question: The scanned image always comes out to be too

dark.

Answer: 1) Use your application to modify the Gamma

setting to 2.2 and 1.8 for your printer and

monitor respectively.

2) Adjust Brightness setting from the TWAIN

interface to get a brighter image.

Question: The scanner works well except for the line art,

the lines of which seem much thicker than the

original.

Answer: Increase the Brightness or adjust the Threshold

setting to adjust the line art image.

Question: Feeding paper from the ADF easily causes paper

jam.

Answer: Make sure to close the front paper tray. While

the front paper tray is open, feeding paper from

the automatic document feeder easily causes

paper jam.

8-3

Summary of Contents for FF-0803S





















































































































Search results

Summary of Contents for FF-0803S

Reviews:

Related manuals for FF-0803S

Brands by name

Popular brands

Avision FF-0803S, User Manual

Search results

Summary of Contents for FF-0803S

Reviews:

Related manuals for FF-0803S

Brands by name

Popular brands