AVIRE Memco 453 000AU Installation Manual Download

Page: 7 / 18

Quick Start Programming

Quick Start Guide

Entering Programming Mode

The first time the Memcom

unit is

powered up, it will automatically
load the Quick Start menu, which is
mapped out here…

Menu Controls

Simply follow the quick start guide
on this page to set up the essential
programming of the unit.

If you require details of the full menu
structure available then please refer
to pages 8-14 of this guide.

Quick Start Process Guide

You have now finished the basic programming. If you
are in an option, press * to return to the Quick Start
Menu. Then, to exit programming mode, Press * and
select the action required upon exiting from this list.

Scroll up

Scroll Down

Forward / Accept

Back / Cancel

For the full list of programming options please refer to pages 8-14

NOT RE

QUIRED IN A

USTRALIA

NOT RE

QUIRED IN A

USTRALIA

NOT RE

QUIRED IN A

USTRALIA

Summary of Contents for Memco 453 000AU



















Search results

Summary of Contents for Memco 453 000AU

Reviews:

Related manuals for Memco 453 000AU

Brands by name

Popular brands

AVIRE Memco 453 000AU, Installation Manual

Search results

Summary of Contents for Memco 453 000AU

Reviews:

Related manuals for Memco 453 000AU

Brands by name

Popular brands