- 9 -
Interface Description
Front View
From left to right :
Status
Power Status Indicator - Red light ON means the outlet power is On.
Green light ON means the outlet power is Off
Reset :
There are two functions for this button.
* Enable WPS function by one short click
There is one long beep as enable WPS function. Please refer page #16
for details.
* Set back to default setting by long press
To reset to original manufacture settings, hold down the reset button with
a sharpen pin for 5- 6 seconds then release. There are THREE beeps
response ( short
–- mid long – short ) which means reset successfully
and 9255W will be rebooted itself ( one beep after reboot ) and most
information go back to default setting ( LAN IP )
IR Receiver :
This area is for receiving the signal from handheld IR remote controller
which comes in shipping package.
Ethernet:
10/100 Mbps network connection
