- 36 -
Single :
9255W will Ping one IP address. As the IP fail times up to the setting times .
Action (ON/OFF/RESET) will be activated .
OR
: 9255W will Ping 2 IP address. Either one IP fail times up to the setting times.
Action (ON/OFF/RESET) will be activated .
AND
: 9255W will Ping 2 IP address. Both IP fail up to the setting times.
Action (ON/OFF/RESET) will be activated.
IP & Host Name : Input the IP Address ( ex: 122.116.123.138) or Host - web address
(www..google.com) you would like to ping.
User can use the “
Check IP
“ bottom to confirm if the address valid.
Failed XX times then action : Use can setup the failure times to define the ping failure .
Repeat : User can setup Continue / Stop to ping after the action activated .
Ping failure action :
Tick the section and select the ON/OFF /Reset action to enable the Ping rules
Select the action (ON/OF / RESET ) as ping failure ( The number of ping failures before the
Action is activated ) . Select the number of Ping Failures that you would like to occur before
the action is activated. The reddish pink number to the right represents the actual number of
ping failures. Keep in mind that four consecutive pings equals to 1 Ping failure.
Ping failure action :
When the number of Ping Failures have been reached. The device can be set to ON , OFF or
Reset function
Reset: Can set up the time gap of OFF to ON. The “ Sec “ section is for action
as Reset only
3.
Enable
section : Select the power to activate as ping fails
function and then press “ Apply
Rule Action “ button to confirm the setting .
EX:
Ping “ 192.168.0.88 “ every 3 seconds , if the ping fail up to 10 times , the outlet will turn off .
The stop ping .